<p>This thesis presents the design and simulation of a multi-channel integrated circuit (IC)
that will be used in nuclear physics experiments. The chip is being designed as a companion
chip for another IC used in particle identification called PSD8C. The IC described in
this thesis is used to create precise timing pulses for starting time-to-voltage converters
(TVCs) and gated integrators on the PSD8C. These timing pulses are created using a
technique called Constant Fraction Discrimination (CFD). Each of the sixteen channels
in the IC contains a Nowlin circuit, leading-edge discriminator, zero-cross discriminator,
and a one-shot circuit to generate the output.
The IC will support input pulse amplitudes between 15 mV and 1.5 V (both positive
and negative), and input pulse rise times between 2 nsec and 192 nsec. The IC will feature
a programmable output pulse width between 50 nsec and 500 nsec. The IC will have an
average power dissipation of 220 mW and occupy an area of 2.4 x 3.5 mm. The variation
(due to process and mismatch) in the trailing edge of the output timing pulse will be less
than 5 nsec (for pulse width of 50 nsec). The assosciated jitter the output timing pulse is
?20 psec (for the 50 nsec pulse width mode). Most importantly the output pulse firing
time variation will be independent of the input amplitude, having a time walk of only
500 psec or less (for input pulse rise time constants of 2 nsec). The IC has been named
CFD16C and the design presented is implemented in a 0.35 micron NWELL process.
| Identifer | oai:union.ndltd.org:PROQUEST/oai:pqdtoai.proquest.com:10842734 |
| Date | 13 September 2018 |
| Creators | Orabutt, Bryan |
| Publisher | Southern Illinois University at Edwardsville |
| Source Sets | ProQuest.com |
| Language | English |
| Detected Language | English |
| Type | thesis |
Page generated in 0.0957 seconds