Return to search

Corrosion of reinforcement in concrete : the effectiveness of organic corrosion inhibitors

Includes bibliographical references. / Reinforcement corrosion in concrete has presented engineers with the challenge of finding ways of prolonging the service life of structures built in aggressive environments. One method of increasing the durability of concrete in aggressive environments is the use of corrosion inhibitors. In this work, two organic corrosion inhibitors were tested to observe their effectiveness in decreasing the rate of corrosion or delaying the onset of corrosion. One of the inhibitors was a migrating corrosion inhibitor while the other was an admixed inhibitor. The corrosion rate of reinforcement in concrete specimens used in this evaluation, was measured using the Linear Polarisation Resistance method. The performance of the admixed inhibitor was also measured in aqueous phase tests. Results of the tests conducted indicate that the admixed inhibitor does delay the onset of corrosion. The Mel caused short to medium term inhibition when the chloride concentration was less than 1.5%.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/9946
Date January 1999
CreatorsRylands, Thaabit
ContributorsMackechnie, James R
PublisherUniversity of Cape Town, Faculty of Engineering and the Built Environment, Department of Mechanical Engineering
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeMaster Thesis, Masters, MSc
Formatapplication/pdf

Page generated in 0.0018 seconds