The resin transfer molding (RTM) process has been used in the composite industry for decades. However, several issues still exist and impede its wide applications. Some design tools for RTM parts have been developed but a more efficient design environment is lacking. Race-tracking is a common phenomenon that makes prediction in actual production difficult and makes current deterministic optimal tooling design unrepeatable. This thesis integrates flow simulation and cost analysis modules together with database management system (DBMS) providing a prototype of the integrated design environment for RTM processes. Preform permeability, especially race-tracking permeability that significantly affects not only simulated but also experimental results, was the factor being investigated. This thesis introduces a statistical approach utilizing statistically distributed variables to explain the race-tracking permeability values. One-dimensional flow experiments were conducted to obtain the permeability values. Three types of distribution (gamma distribution, Weibull distribution and lognormal distribution) were chosen as candidates. Experimental data were fitted for the three distributions. A goodness-of-fit test was performed to find the one that best describes the experimental data. Taking into account the fact that the severe levels of race-tracking can be represented by statistically distributed variables, this thesis proposes an optimization approach to minimize the sensitivity of the mold design to uncertainty of race-tracking permeabilities by choosing the appropriate locations of gates and vents (robust tooling design). A sensitivity that indicates the process robustness was defined as objective and evaluated by RTMSim software both for 2D and 2.5D geometry. With the conclusion that the ratios of race-tracking permeability over average values can be described by Weibull distributed variables, a random number generator was employed to generate the input race-tracking permeability data for obtaining values of the objective. Locations of vents were determined via the assumption that vents should be assigned at the locations where flow ends to avoid dry spot formation. Locations of gate were optimized from most possible locations. / A Thesis submitted to the Department of Industrial and Manufacturing Engineering in partial fulfillment of the requirements for the degree of Master of
Science. / Fall Semester, 2003. / October 23, 2003. / Robust Design, Flow Simulation / Includes bibliographical references. / Chuck Zhang, Professor Directing Thesis; Okenwa Okoli, Committee Member; Zhiyong Liang, Committee Member.
| Identifer | oai:union.ndltd.org:fsu.edu/oai:fsu.digital.flvc.org:fsu_181279 |
| Contributors | Li, Jing (authoraut), Zhang, Chuck (professor directing thesis), Okoli, Okenwa (committee member), Liang, Zhiyong (committee member), Department of Industrial and Manufacturing Engineering (degree granting department), Florida State University (degree granting institution) |
| Publisher | Florida State University, Florida State University |
| Source Sets | Florida State University |
| Language | English, English |
| Detected Language | English |
| Type | Text, text |
| Format | 1 online resource, computer, application/pdf |
| Rights | This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s). The copyright in theses and dissertations completed at Florida State University is held by the students who author them. |
Page generated in 0.0017 seconds