Return to search

A novel method for power system stabilizer design

Power system stability is defined as the condition of a power system that enables it to remain in a state of operating equilibrium under normal operating conditions and to regain an acceptable state of equilibrium after being subjected to a finite disturbance. In the evaluation of stability, the focus is on the behavior of the power system when subjected to both large and small disturbances. Large disturbances are caused by severe changes in the power system, e.g. a short-circuit on a transmission line, loss of a large generator or load, loss of a tie-line between two systems. Small disturbances in the form of load changes take place continuously requiring the system to adjust to the changing conditions. The system should be capable of operating satisfactorily under these conditions and successfully supplying the maximum amount ofload. Power system stability is defined as the condition of a power system that enables it to remain in a state of operating equilibrium under normal operating conditions and to regain an acceptable state of equilibrium after being subjected to a finite disturbance. In the evaluation of stability, the focus is on the behavior of the power system when subjected to both large and small disturbances. Large disturbances are caused by severe changes in the power system, e.g. a short-circuit on a transmission line, loss of a large generator or load, loss of a tie-line between two systems. Small disturbances in the form of load changes take place continuously requiring the system to adjust to the changing conditions. The system should be capable of operating satisfactorily under these conditions and successfully supplying the maximum amount ofload. This dissertation deals with the use of Power System Stabilizers (PSS) to damp electromechanical oscillations arising from small disturbances. In particular, it focuses on three issues associated with the damping of these oscillations. These include ensuring robustness of PSS under changing operating conditions, maintaining or selecting the structure of the PSS and coordinating multiple PSS to ensure global power system robustness. To address the issues outlined above, a new PSS design/tuning method has been developed. The method, called sub-optimal Hoo PSS design/tuning, is based on Hoo control theory. For the implementation of the sub-optimal Hoo PSS design/tuning method, various standard optimization methods, such as Sequential Quadratic Programming (SQP), were investigated. However, power systems typically have multiple "modes" that result in the optimization problem being non-convex in nature. To overcome the issue of non-convexity, the optimization algorithm, embedded in the 111 University of Cape Town sub-optimal Hoo PSS design/tuning method, is based on Population Based Incremental Learning (PBIL). This new sub-optimal Heo design/tuning method has a number of important features. The method allows for the selection of the PSS structure i.e. the designer can select the order and structure of the PSS. The method can be applied to the full model of the power system i.e. there is no need for using a reduced-order model. The method is based on Heo control theory i.e. it uses robustness as a key objective. The method ensures adequate damping of the electromechanical oscillations of the power system. The method is suitable for optimizing existing PSS in a power system. This method improves the overall damping of the system and does not affect the observability of the system poles. To demonstrate the effectiveness of the sUb-optimal Hoo PSS design/tuning method, a number of case studies are presented in the thesis. The sub-optimal Hoo design/tuning method is extended to allow for the coordinated tuning of multiple controllers. The ability to tune multiple controllers in a coordinated manner allows the designer to focus on the overall stability and robustness of the power system, rather than focusing just on, the local stability of the system as viewed from the generator where the controllers are connected.

Identiferoai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uct/oai:localhost:11427/38353
Date04 September 2023
CreatorsChen, Lian
ContributorsPetroianu
PublisherFaculty of Engineering and the Built Environment, Department of Electrical Engineering
Source SetsSouth African National ETD Portal
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral Thesis, Doctoral, PhD
Formatapplication/pdf

Page generated in 0.0022 seconds