In one of the first hours of study at the Institute of Mechanics of Bodies, Mechatronics and Biomechanics, the author of this work received three basic recommendations regarding measurement: 1) Do not measure! 2) If you measure, do not repeat the measurement!! 3) If you repeat the measurement, do not compare the measurements!!! However, this thesis boldly violates all three recommendations. In the introductory theoretical part, it briefly introduces the vibration of multi-degree of freedom damped systems and describes experimental ways of determining the modal damping. It also summarizes the Operational Modal Analysis (OMA) approach, explains the principle of the FDD method, and introduces EFDD (Enhanced Frequency Domain Decomposition) method which allows to determine not only natural frequencies and shapes as FDD does, but also modal damping of the shapes. A script in Matlab environment for processing vibrations using EFDD method is one of the thesis outputs. The script is first tested by computational model, where a model system with known damping is tested and damping is determined by the script. Subsequently, the work moves to the actual measurement of the real system - a bonded bar which is analysed by Experimental Modal Analysis and OMA, while the second variant uses commercial EFDD method (Brüel a Kjr company) and programmed script. In the conclusion of the thesis the damping results are compared to each other. The diploma thesis continues in Ing. M. Pop’s thesis – Modal Analysis Experimental Method Verification. From this work a part of measured data is taken. Specific cases of data use are always listed in the appropriate section of the text.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443767 |
Date | January 2021 |
Creators | Sodomka, Tomáš |
Contributors | Lošák, Petr, Houfek, Lubomír |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds