The results of the degradation of glycerol in supercritical water show that conversion of pure glycerol (58 % at 550 \(^0\)C) without a catalyst can be achieved, but complete conversion of pure glycerol over Fe\(_2\)O\(_3\)+Cr\(_2\)O\(_3\) or Fe\(_3\)O\(_4\) catalysts (at 550\(^0\)C, 250 barg, <15 wt% feed concentration, 10.1 g and 4 mm catalyst particles) can be reached. Crude glycerol conversion decreases from 100 to 67 mole% and 100 to 74 mole% over the same catalysts and conditions. Hydrogen yield was as high as 61 mole% and 49 mole % when crude glycerol was gasified over Fe\(_3\)O\(_4\) and Fe\(_2\)O\(_3\)+Cr\(_2\)O\(_3\), respectively. 64 mole% of syngas was obtained with minimum 4:1 mole ratio of H\(_2\):CO. Hydrocarbon yields (69 mole% for ethylene and 22 mole% for methane) were obtained and this decreased with temperature as resulted of thermal cracking. Small amounts of char (<3.1 wt%) and carbon deposition on the catalyst surface and inside the reactor wall was observed. Prolonged exposure of Fe\(_2\)O\(_3\)+Cr\(_2\)O\(_3\) to 172 h on-stream under supercritical conditions resulted in fragmentation of the surface from metal sintering, which reduced activity for H\(_2\) production. 42 mole% of hydrogen was obtained from 2 wt% digestate gasification at the same conditions.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:589680 |
| Date | January 2014 |
| Creators | Tapah, Boris Fotso |
| Publisher | University of Birmingham |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://etheses.bham.ac.uk//id/eprint/4752/ |
Page generated in 0.0056 seconds