Kinetic equation parameters for the curing reaction of a commercial glass fiber reinforced high performance epoxy prepreg composed of the tetrafunctional epoxy tetraglycidyl 4,4-diaminodiphenyl methane (TGDDM), the tetrafunctional amine curing agent 4,4-diaminodiphenylsulfone (DDS) and an ionic initiator/accelerator, are determined by various thermal analysis techniques and the results compared. The reaction is monitored by heat generated determined by differential scanning calorimetry (DSC). The changes in physical properties indicating increasing conversion are followed by shifts in glass transition temperature determined by DSC and temperature-modulated DSC (TMDSC), thermomechanical (TMA) and dynamic mechanical (DMA) analysis and thermally stimulated depolarization (TSD). Changes in viscosity, also indicative of degree of conversion, are monitored by DMA. Thermal stability as a function of degree of cure is monitored by thermogravimetric analysis (TGA). The parameters of the general kinetic equations, including activation energy and rate constant, are explained and used to compare results of various techniques. The utilities of the kinetic descriptions are demonstrated in the construction of a useful time-temperature-transformation (TTT) diagram for rapid determination of processing parameters in the processing of prepregs.
Copyright is held by the author, unless otherwise noted. All rights reserved.
Files: Thesis.pdf
Special Conditions
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc2281 |
| Date | 12 1900 |
| Creators | Bilyeu, Bryan |
| Contributors | Brostow, Witold, 1934-, Menard, Kevin P., Reidy, Richard, D'Souza, Nandika A., Gnade, Bruce |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | Text |
| Rights | Use restricted to UNT Community, Copyright, Bilyeu, Bryan, Copyright is held by the author, unless otherwise noted. All rights reserved. |
Page generated in 0.0019 seconds