The numerical modelling of the VKI-Longshot facility remains a challeng-ing task as it requires multi-physical numerical methods in order to simulate all the components. In the current dissertation, numerical tools were developed in order to study each component of the facility separately and a deep investigations of each stage of the shot were performed. This helped to better understand the different processes involved in the flow development inside this hypersonic wind tunnel. However the numerical computation of different regions of the facility treated as independent from each others remains an approximation at best.The accuracy of the rebuilding code for determining the free stream conditions and the total enthalpy in the VKI-Longshot facility was investigated by using a series of unsteady numerical computations of axisymmetric hypersonic flow over a heat flux probe. Good agreement was obtained between the numerical results and the measured data for both the stagnation pressure and the heat flux dur- ing the useful test time.The driver-driven part of the Longshot facility was modelled using the quasi one-dimensional Lagrangian solver L1d2. The three main conditions used for the experiments —low, medium and high Reynolds number —were considered.The chambrage effect due to the junction between the driver and the driven tubes in the VKI-Longshot facility was investigated. The computation showed great ben- efit of the chambrage in increasing the speed of the piston and thus the final compression ratio of the test gas.Two dimensional simulations of the flow in the driver and the driven tube were performed using Arbitrary Lagrangian Eulerian (ALE) solver in COOLFLuiD. A parallel multi-domain strategy was developed in order to integrate the moving piston within the computational domain.The computed pressure in the reservoir is compared to the one provided by the experiment and good agreement was obtained for both con- editions.Finally, an attempt was made to compute the starting process of the flow in the contoured nozzle. The transient computation of the flow showed how the primary shock initiates the flow in the nozzle before reaching the exit plan at time of 1.5 [ms] after the diaphragm rupture. The complex interactions of the reflected shocks in the throat raise the temperature above 9500 [K] which was not expected. Chemical dissociation of Nitrogen was not taken into account during this transient investigation which may play a key role considering the range of temperature reached near the throat. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
| Identifer | oai:union.ndltd.org:ulb.ac.be/oai:dipot.ulb.ac.be:2013/229727 |
| Date | 29 January 2014 |
| Creators | Bensassi, Khalil |
| Contributors | Deconinck, Herman, Rambaud, Patrick, Degrez, Gérard, Hannemann, Klaus, Lacor, Chris, Parente, Alessandro |
| Publisher | Universite Libre de Bruxelles, Université libre de Bruxelles, Ecole polytechnique de Bruxelles – Electromécanicien, Bruxelles |
| Source Sets | Université libre de Bruxelles |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis, info:ulb-repo/semantics/doctoralThesis, info:ulb-repo/semantics/openurl/vlink-dissertation |
| Format | No full-text files |
Page generated in 0.0054 seconds