One of the problems sensor networks face is adversaries corrupting nodes along the path to the base station. One way to reduce the effect of these attacks is multipath routing. This introduces some intrusion-tolerance in the network by way of redundancy but at the cost of a higher power consumption by the sensor nodes. Erasure coding can be applied to this scenario in which the base station can receive a subset of the total data sent and reconstruct the entire message packet at its end. This thesis uses two commonly used encodings and compares their performance with respect to power consumed for unencoded data in multipath routing. It is found that using encoding with multipath routing reduces the power consumption and at the same time enables the user to send reasonably large data sizes. The experiments in this thesis were performed on the Tiny OS platform with the simulations done in TOSSIM and the power measurements were taken in PowerTOSSIM. They were performed on the simple radio model and the lossy radio model provided by Tiny OS. The lossy radio model was simulated with distances of 10 feet, 15 feet and 20 feet between nodes. It was found that by using erasure encoding, double or triple the data size can be sent at the same power consumption rate as unencoded data. All the experiments were performed with the radio set at a normal transmit power, and later a high transmit power.
| Identifer | oai:union.ndltd.org:unt.edu/info:ark/67531/metadc5426 |
| Date | 12 1900 |
| Creators | Vishwanathan, Roopa |
| Contributors | Tate, Stephen R., Akl, Robert G., Dantu, Ram |
| Publisher | University of North Texas |
| Source Sets | University of North Texas |
| Language | English |
| Detected Language | English |
| Type | Thesis or Dissertation |
| Format | Text |
| Rights | Public, Copyright, Vishwanathan, Roopa, Copyright is held by the author, unless otherwise noted. All rights reserved. |
Page generated in 0.0016 seconds