This dissertation thesis is concerning with an interaction between mobile working machines and rolled surfaces. Machines and their constructions parts behavior were observed. There are some machines that can change state of surface. And due to these change of surface the machine is in different conditions for drive and also for works. The interaction of working machines and rolled surfaces was categorized in this work and for each category here is a methodic work flow for solution of various cases. Three examples are described in this work. Some simulating programs were used for all cases and therefore there is a methodic work flow for creating and simulating of models. Three described examples include a complex solution of hydraulic drive for vibration exciter of vibration roller, small cleaner of canalizations with aim on load case to frame of this cart. The third example describes solution of undercarriage frames of agricultural semi-trailers. This example is the most extensive chapter from this work due to including of marketing research at the beginning of development and also verification of simulated results with results from real prototype tests at the end of development of these undercarriage frames.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233912 |
| Date | January 2010 |
| Creators | Pokorný, Jan |
| Contributors | Hrabovský, Leopold, Červinka, Jan, Škopán, Miroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/doctoralThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds