Yes / The Riser of a Fluid Catalytic Cracking (FCC) unit cracks gas oil to make fuels such as gasoline and diesel. However, changes in quality, nature of crude oil blends feedstocks, environmental changes and the desire to obtain higher profitability, lead to many alternative operating conditions of the FCC riser. The production objective of the riser is usually the maximization of gasoline and diesel. Here, an optimisation framework is developed in gPROMS to maximise the gasoline in the riser of an industrial FCC unit (reported in the literature) while optimising mass flowrates of catalyst and gas oil. A detailed mathematical model of the process developed is incorporated in the optimisation framework. It was found that, concurrent use of the optimal values of mass flowrates of catalyst (310.8 kg/s) and gas oil (44.8 kg/s) gives the lowest yield of gases, but when these optimum mass flowrates are used one at time, they produced the same and better yield of gasoline (0.554 kg lump/ kg feed). / Petroleum Technology Development Fund, Nigeria, financially sponsored the study.
| Identifer | oai:union.ndltd.org:BRADFORD/oai:bradscholars.brad.ac.uk:10454/11746 |
| Date | 24 March 2017 |
| Creators | John, Yakubu M., Patel, Rajnikant, Mujtaba, Iqbal |
| Source Sets | Bradford Scholars |
| Language | English |
| Detected Language | English |
| Type | Article, Accepted manuscript |
| Rights | © 2017 American Chemical Society. This document is the Accepted Manuscript version of a Published Work that appeared in final form in Energy and Fuels, copyright © American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see http://dx.doi.org/10.1021/acs.energyfuels.7b00071, Unspecified |
Page generated in 0.0021 seconds