This master's thesis makes a brief comparison of design variants of cranes for general use on the deck of a vessel. Further, this thesis deals with a design of a crane with a telescopic jib and a single knuckle. An important part of the crane’s design is its kinematic solution, which was modified in the design phase. The last step of a simplified analytical calculation of the jib for design steel construction is given. This preliminary calculation is the starting point for a FEM model and for the following FEM analysis. A stress control is made according to the Lloyd's Register of Shipping agency’s standard for lifting appliances in marine environment and also according to the recommendations of Huisman company. A part of the proposed solution is a selection of main components of the crane. The master’s thesis contains a summary of some operational and other information which characterize possibilities of the crane’s use. This thesis also includes source materials for drawing documentation.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229793 |
| Date | January 2011 |
| Creators | Dlužanský, Tomáš |
| Contributors | Horák, Michal, Pokorný, Přemysl |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds