The thermal stresses, residual stresses distributions in a vertical cavity surface emitting laser (VCSEL) are investigated in this thesis. The post-weld shifts of the laser light sources in the VCSEL under the re-flow, temperature cycling test and high temperature aging test have also been simulated and studied. The creeping effects of the 63Sn/37Pb solder on the stresses distributions and post-weld shifts are compared and discussed.
The finite element package MARC is used for the stresses and deformation simulations of a VCSEL under different load cases. The heat transfer, the non-linear couple elastic-plastic increment and the creep models are employed in the numerical simulations. The temperature dependent material properties of the 63Sn/37Pb and 96.5Sn/3.5Ag solder are used for the temperature cycling and aging test. The effect of the circle and square solder pad designs on the stresses distributions in a VCSEL is also studied in this thesis. Numerical results indicate that the residual stresses introduced in the solidification is significant in stress and post-weld analyses of a VCSEL.
Identifer | oai:union.ndltd.org:NSYSU/oai:NSYSU:etd-0725101-194838 |
Date | 25 July 2001 |
Creators | Hsuts, Jaw-Min |
Contributors | Wood-Hi Cheng, Jaw-Hwa Kuang,, Li-Sen Cheng |
Publisher | NSYSU |
Source Sets | NSYSU Electronic Thesis and Dissertation Archive |
Language | Cholon |
Detected Language | English |
Type | text |
Format | application/pdf |
Source | http://etd.lib.nsysu.edu.tw/ETD-db/ETD-search/view_etd?URN=etd-0725101-194838 |
Rights | not_available, Copyright information available at source archive |
Page generated in 0.0014 seconds