Damage initiation and growth under compression-compression fatigue loading were investigated for a stitched uniweave material system with an underlying AS4/3501-6 quasi-isotropic layup. Performance of unnotched specimens having stitch rows at either 0° or 90° to the loading direction was compared. Special attention was given to the effects of stitching-related manufacturing defects. Damage evaluation techniques included edge replication, stiffness monitoring, X-ray radiography, residual compressive strength, and laminate sectioning. It was found that the manufacturing defect of inclined stitches had the greatest adverse effect on material performance. 0° and 90° specimen performances were generally the same. While the stitches were the source of damage initiation, they also slowed damage propagation both along the length and across the width and affected through the thickness damage growth. A pinched layer zone formed by the stitches particularly affected damage initiation and growth. The compression failure mode was transverse shear for all specimens, both in static compression and fatigue cycling tests. Specimens without stitches were not available for comparison. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/45318 |
| Date | 24 October 2009 |
| Creators | Vandermey, Nancy E. |
| Contributors | Engineering Mechanics |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis, Text |
| Format | ix, 114 leaves, BTD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | OCLC# 24112613, LD5655.V855_1991.V367.pdf |
Page generated in 0.0024 seconds