Conventional fiber optic interferometric sensors employing a monochromatic source prove to be inadequate for applications requiring absolute, real-time value of magnitude and direction of the applied perturbation. This limitation can be overcome by using a broadband light source to extract unambiguous information from the sensor in the wavelength domain. Several variations in the signal processing techniques for white light interferometry are discussed and compared in terms of resolution, bandwidth and cost. A detailed analysis is made of the principle of operation and basic features of the commercially available absolute sensing system. This compact system is self calibrating, has a 100 micro-strain Ole) strain and 2°C temperature resolution and is ideal for applications in environments where the parameter to be measured is static or quasi-static. High finesse Fabry-Perot cavities are employed to obtain almost an order of magnitude sensitivity improvement over conventional low finesse cavities.
The principle of white light interferometry is extended to absolute axial stain and temperature sensing in two-mode, elliptical-core fibers. Other novel applications, such as to operation of photo induced refractive index gratings and fiber characterization are proposed. / Master of Science
Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/44866 |
Date | 19 September 2009 |
Creators | Bhatia, Vikram |
Contributors | Electrical Engineering, Murphy, Kent A., Claus, Richard O., Jacobs, Ira, Wang, Anbo |
Publisher | Virginia Tech |
Source Sets | Virginia Tech Theses and Dissertation |
Language | English |
Detected Language | English |
Type | Thesis, Text |
Format | ix, 81 leaves, BTD, application/pdf, application/pdf |
Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Relation | OCLC# 29815438, LD5655.V855_1993.B527.pdf |
Page generated in 0.0018 seconds