The process of precious metal refining can be up to 99.99% efficient at best, and although it may seem small, the amount of valuable metal lost to waste streams is appreciable enough to warrant recovery. The method currently used to remove entrained metal ions from refinery wastewaters, chemical precipitation, is not an effective means for selective recovery of precious metals from a wastewater. Biosorption, the ability of certain types of biomass to bind and concentrate metals from even very dilute aqueous solutions, may be an effective point-source metal recovery strategy. The yeast, Saccharomyces cerevisiae, has been found capable of sorbing numerous precious and base metals, and is a cheap and abundant source of biomass. As such, it represents a possible precious metal sorbent for application to refining wastewaters. In this investigation, S. cerevisiae biomass was immobilized, using polyethyleneimine and glutaraldehyde, to produce a suitable sorbent, which was found to be capable of high platinum uptake (150 to 170 mg/g) at low pH (< 2). The sorption mechanism was elucidated and found to be a chemical reaction, which made effective desorption impossible. The sorption process was investigated in a packed bed column conformation, the results of which showed that the diameter and height of the column require further optimization in order to attain the metal uptake values achieved in the batch studies. When applied to a refinery wastewater, two key wastewater characteristics limited the success of the sorption process; the high inorganic ion content and the complex speciation of the platinum ions. The results proved the concept principle of platinum recovery by immobilized yeast biosorption and indicated that a more detailed understanding of the platinum speciation within the wastewater is required before the biosorption process can be applied. Overall, the sorption of platinum by the S. cerevisiae sorbent was demonstrated to be highly effective in principle, but the complexity of the wastewater requires that pretreatment steps be taken before the successful application of this process to an industrial wastewater.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:4071 |
Date | January 2008 |
Creators | Mack, Cherie-Lynn |
Publisher | Rhodes University, Faculty of Science, Biochemistry, Microbiology and Biotechnology |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Doctoral, PhD |
Format | 193 leaves, pdf |
Rights | Mack, Cherie-Lynn |
Page generated in 0.0919 seconds