Fretting fatigue is a damage process that may arise in engineering applications where small cyclic relative displacements develop inside contacts leading to detrimental effects on the material fatigue properties. Fretting is located in regions not easily accessible, which makes it a dangerous phenomenon. It is therefore important to be able to make reliable predictions of the fretting fatigue lives. The work presented in this thesis has its focus on different aspects related to fretting fatigue in the titanium alloy Ti-17. A fretting experiment was developed which allowed for separate control of the three main fretting loads. Initially, the evolution of the coefficient of friction inside the slip region was investigated experimentally and analytically. Subsequently, 28 fretting tests were performed in which large fatigue cracks developed. The fretting tests were firstly evaluated with respect to fatigue crack initiation through five multiaxial fatigue criteria. The criteria predicted a too high fretting fatigue limit. A possible clue to the discrepancy was found in the fretting induced surface roughness with the asperity-pit interactions. The fatigue growth of the large fretting cracks was numerically modelled through a parametric crack growth procedure. The predicted lives were compared to the experimental outcome. The numerical simulations showed that linear elastic fracture mechanics was an appropriate tool for the prediction of fretting fatigue propagation lives in the long crack regime. Fatigue cracks spend most of their propagation life in the small crack regime. The possibility of modelling the small crack behaviour is therefore very important from the engineering point of view. The fatigue growth of through thickness short cracks was studied experimentally and numerically in the four-point bend configuration. It was found that linear elastic fracture mechanics and closure-free material growth data furnished conservative estimates for cracks longer than 50 μm. One method to improve fretting fatigue life is to shot peen the contact surfaces. Experimental results on fretting life with or without shot peening were simulated. The fatigue life enhancement in shot peened specimens could be explained by slower crack growth in the surface material layer with residual compressive stresses. / QC 20100827
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:kth-4185 |
| Date | January 2006 |
| Creators | Cadario, Alessandro |
| Publisher | KTH, Hållfasthetslära (Inst.), Stockholm : KTH |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Doctoral thesis, comprehensive summary, info:eu-repo/semantics/doctoralThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | Trita-HFL, 1104-6813 ; 0423 |
Page generated in 0.0023 seconds