Return to search

Mechanické vlastnosti materiálů připravovaných pomocí procesu SLM / Mechanical properties of materials prepared by SLM process

This diploma thesis deals with properties of multi-materials interface composed of pure iron and Cu7Ni2Si1Cr alloy produced by SLM process. The theoretical part of thesis is focused on selective laser melting technology, and on description of defects connected with the production of SLM parts. Furthermore, one section deals with the production of multi-materials prepared by the SLM process. The experimental part of this thesis deals with selections of the SLM process parameters appropriate for bulk samples preparation. Mechanical properties were determined by the tensile tests at room temperature. Metallographic and fractographic analyses were performed for evaluation of the microstructure and description of the fracture mechanisms.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:400837
Date January 2019
CreatorsVašáková, Kristýna
ContributorsŘehořek, Lukáš, Pantělejev, Libor
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0021 seconds