The aim of this work is to research the issue of optimal sizing and location of photovoltaic distributed generation (PVDG) units on radial distribution feeders, and develop new procedures by which the optimal location may be determined. The procedures consider the concept that the PVDG production varies independently from changes in feeder load demand. Based on that, the developed procedures deal with two performance curves; the feeder daily load curve driven by the consumer load demand, and the PVDG daily production curve driven by the solar irradiance. Due to the mismatch in the profile of these two curves the PVDG unit might end up producing only part of its capacity at the time the feeder meets its peak load demand. An actual example of that is the summer peak load demand in Abu Dhabi city that occurs at 5:30 pm, which is 5 hours after the time the PV array yields its peak. Consequently, solving the optimization problem for maximum line power loss reduction (∆PPL) is deemed inappropriate for the connection of PVDG units. Accordingly, the procedures have been designed to solve for maximum line energy loss reduction (∆EL). A suitable concept has been developed to rate the ∆EL at one time interval over the day, namely feasible optimization interval (FOI). The concept has been put into effect by rating the ∆EL in terms of line power loss reduction at the FOI (ΔPLFOI). This application is deemed very helpful in running the calculations with no need to repeat the energy-based calculations on hourly basis intervals or even shorter. The procedures developed as part of this work have been applied on actual feeders at the 11kV level of Abu Dhabi distribution network. Two main scenarios have been considered relating to the avoidance and allowance of reverse power flow (RPF). In this course, several applications employing both single and multiple PVDG units have been solved and validated. The optimization procedures are solved iteratively. Hence, effective sub-procedures to help determine the appropriate number of feasible iterative steps have been developed and incorporated successfully. Additionally, the optimization procedures have been designed to deal with a 3-phase feeder under an unbalanced load condition. The line impedances along the feeder are modeled in terms of a phase impedance matrix. At the same time, the modeling of feeder load curves along with the power flow calculations and the resulting losses in the lines are carried out by phase. The resulting benefits from each application have been evaluated and compared in terms of line power loss reduction at the FOI (∆PLFOI) along with voltage and current flow profile.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:571302 |
| Date | January 2011 |
| Creators | Al-Sabounchi, Ammar M. Munir |
| Publisher | De Montfort University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/2086/5225 |
Page generated in 0.0019 seconds