Room temperature tensile tests were performed on aged Fe-Cu and tempered Fe-C martensites to study the strengthening of ferrite, due to dispersions of non-coherent second phase particles over a range of particle sizes. Electron Microscopy was used to determine the structure parameters.
Strengthening was observed-in both the aged Fe-Cu, with a
soft second phase and the tempered Fe-C martensite with a hard second
phase dispersion. In the aged Fe-Cu, the yield strength seems to be
due to the bowing out of dislocations between particles - an Orowan-
type of mechanism where as in the tempered Fe-C martensite, the strengthening
is possibly due to several mechanisms involving cementite dispersions,
grain boundaries and excess carbon in solution. Aged Fe-Cu, did not
exhibit any appreciable increase in work hardening over that of pure
iron. But in the tempered Fe-C martensite, the work hardening was higher
than that of pure iron and increased with cementite particle size. It
was not possible to explain the observed work hardening behaviour with
the help of the existing work hardening theories. / Applied Science, Faculty of / Materials Engineering, Department of / Graduate
Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/36306 |
Date | January 1967 |
Creators | Pattanaik, Suryanarayan |
Publisher | University of British Columbia |
Source Sets | University of British Columbia |
Language | English |
Detected Language | English |
Type | Text, Thesis/Dissertation |
Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0015 seconds