The first aim of this work was to develop copper modified carbon felt electrode for detection of amino acids, which are not electrochemically active on ordinary carbon electrodes. Phenylalanine solution at a concentration 1.0 mmol dm-3 was chosen as the testing solution. Electrode modified with electrochemical deposition of copper from mixture of copper(II) sulphate and sodium sulphate provided very low responses which were decreasing during first measurements, apparently because of insufficient amount of copper. Therefore, further experiments were performed using copper microparticles as a modifier. Copper microparticles activated in nitric acid at a concentration 80 mmol dm-3 were applied at carbon felt by several techniques and in different parts of the felt, i.e. by stirring the felt in microparticles suspension, by dripping of the suspension to the part of the felt in contact with capillary (proximal), between two parts of the carbon felt (sandwich) and at a part of the carbon felt in contact with electrolyte in a measuring cell (distal). Electrodes modified in the distal and in the sandwich arrangement were chosen as the best ones. In the last part, calibration dependences for phenylalanine in concentration range from 0.025 mmol dm-3 to 1.0 mmol dm-3 were measured on the last two electrodes....
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:396722 |
Date | January 2019 |
Creators | Baroch, Martin |
Contributors | Dejmková, Hana, Schwarzová, Karolina |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds