A humidity fiber optic sensor based on phase-shifted (PS) Fiber Bragg gratings (FBG) is demonstrated. Compared to the standard FBG sensors, the peak of the PS-FBG slips into 2 narrow peaks and forms a sharp dip in the middle. As a result, the resolution of the measurement will be higher. The sensors used in the experiments were fabricated by coating the PS-FBG surface with a moisture-sensitive polyimide and is based on the strain effect caused by the swelling of the coating after moisture absorption. The same trend seen in a standard FBG sensor can be achieved, but with higher measurement resolution in environments differing by humidity and temperature. This thesis presents simulation and measurement results, including sensitivity and response time, of the PS-FBG sensor approach for humidity sensing, as compared to the standard FBG sensors. Stability and hysteresis are also discussed.
Identifer | oai:union.ndltd.org:WATERLOO/oai:uwspace.uwaterloo.ca:10012/7789 |
Date | 20 August 2013 |
Creators | Wang, Hao |
Source Sets | University of Waterloo Electronic Theses Repository |
Language | English |
Detected Language | English |
Type | Thesis or Dissertation |
Page generated in 0.0018 seconds