<p>Fiber-optic communication systems have revolutionized the telecommunications industry and have played a major role in the advent of the Information Age. Thousands of kilometers of optical fiber are used by telecommunications companies to transmit telephone signals, Internet communication, and cable television signals throughout the world. So, working in this area has always been interesting. This thesis analyzes the nonlinearity of fiber-optic systems and proposes a system to mitigate fiber nonlinear e®ects. The topics of this thesis can be categorized into two parts. In the first part of thesis (Chapters 2, 3, and 4), analytical models are developed for fiber-optic nonlinear effects. It is important to have an accurate analytical model so that the impact of a specific system/signal parameter on the performance can be assessed quickly without doing time-consuming Monte-Carlo simulations. In the second part (Chapters 5, and 6), a multi-core/fiber architecture is proposed to reduce the nonlinear effects.</p> <p>In Chapter 2, intrachannel nonlinear impairments are studied and an analytical model for the calculation of power spectral density (PSD) and variance of the non- linear distortion is obtained based on quadrature phase-shift keying (QPSK) signal. For QPSK signals, intrachannel four-wave mixing (IFWM) is the only stochastic non- linear distortion. To develop the analytical model, a first order perturbation theory is used. For a Gaussian pulse shape, a closed form formula is obtained for the PSD of IFWM. For non-Gaussian pulses, it is not possible to find the PSD analytically. However, using stationary phase approximation approach, convolutions become multiplications and a simple analytical expression for the PSD of the nonlinear distortion can be found. The total PSD is obtained by adding the PSD of amplified spontaneous emission (ASE) PSD to that of the nonlinear distortion. Using the total PSD, bit error ratio (BER) can be obtained analytically for a QPSK system. The analytically estimated BER is found to be in good agreement with numerical simulations. Significant computational effort can be saved using the analytical model as compared to numerical simulations, without sacrificing much accuracy.</p> <p>In Chapter 3, the same approach as that in Chapter 2 is used to find an analytical expression for the PSD of the intrachannel nonlinear distortion of a fiber-optic system based on quadrature amplitude modulation (QAM) signal. Unlike the QPSK signal, intrachannel cross-phase modulation (IXPM) is a stochastic process for the QAM signal which leads to the increase of the nonlinear distortion variance. In this chapter, analytical expressions for the PSDs of self-phase modulation (SPM), IXPM, IFWM, and their correlations are obtained for the QAM signal. Simulation results show good agreement between the analytical model and numerical simulation.</p> <p>In Chapter 4, inter-channel nonlinear impairment is studied. This time, a first order perturbation technique is used to develop an analytical model for SPM and cross-phase modulation (XPM) distortions in a wavelength division multiplexing (WDM) system based on QAM. In this case, SPM distortion is deterministic and does not contribute to the nonlinear noise variance. On the other hand, XPM is stochastic and contributes to the noise variance. In this chapter, effects of input launch power, fiber dispersion, system reach, and channel spacing on the nonlinear noise variance are investigated as well.</p> <p>In Chapter 5, a single-channel multi-core/fiber architecture is proposed to reduce intrachannel fiber nonlinear effects. Based on the analytical model obtained in the first part of thesis, the nonlinear distortion variance scales as P<sup>3</sup>, where P is the fiber input launch power, which suggests that decreasing the fiber input power can reduce the nonlinear distortion significantly. In this system, the input power is divided between multiple cores/fibers by a power splitter at the input of each span and a power combiner adds the output fields of multiple cores/fibers so that one amplifier can be used for each span. In this case, each core/fiber receives less power and hence adds less nonlinear distortion to the signal. In a practical system, individual fiber parameters are not identical; so the optical pulses propagating in the fibers undergo different amounts of phase shifts and timing delays due to the fluctuations of fibers' propagation constants and fibers' inverse group speeds. Optical and electrical equalizers are proposed to compensate for these inter-core/fiber dispersions. In the case of an optical equalizer, adaptive time shifters and phase shifters are adjusted such that the maximum power is obtained at the output of power combiner. Our numerical simulation results show that for unrepeatered systems, the performance (Q factor) is improved by 6.2 dB using 8-core/fiber configuration as compared to single- core fiber system. In addition, for multi-span system, the transmission reach at BER of 2.1*10<sup>-3</sup> is quadrupled in 8-core/fiber configuration.</p> <p>In Chapter 6, a multi-channel multi-core/fiber architecture is proposed to reduce the inter-channel nonlinear distortions. In this architecture, different channels of a WDM system are interleaved between multiple cores/fibers which increases the channel spacing in each core/fiber. Higher channel spacing decreases the inter-channel nonlinear impairments in each core/fiber which leads to system performance improvement. At the end of each span, a multiplexer adds the channels from different cores/fibers so that one amplifier can be used for all of the channels. Unlike the single-channel multi-core/fiber system, the WDM multi-core/fiber system does not require equalizers since different cores/fibers carry channels with different frequencies. Simulation results show that for a 39-span system, the 4-core/fiber system with negligible crosstalk outperforms the single-core system by 2.2 dBQ<sub>20</sub>. The impact of crosstalk between cores of a multi-core fiber (MCF) on the system performance is studied. The simulation results show that the performance of the multi-core WDM system is less sensitive to the crosstalk effect compared to conventional multi-core systems since the propagating channels in the cores are not correlated in frequency domain.</p> / Doctor of Philosophy (PhD)
Identifer | oai:union.ndltd.org:mcmaster.ca/oai:macsphere.mcmaster.ca:11375/13497 |
Date | 10 1900 |
Creators | NADERI, SHAHI SINA |
Contributors | Kumar, Shiva, Max Wong, Steve Hranilovic, Xun Li, David Plant, Electrical and Computer Engineering |
Source Sets | McMaster University |
Detected Language | English |
Type | thesis |
Page generated in 0.0024 seconds