Content:
The research on Collagen that possesses unique fibre structure are reported frequently. In this paper, the cross image of leather fibre of dried wet blue cowhide embedded with and without epoxy resin were
investigated with micro computed topography(MCT). The images obtained by MCT of leather fibre are original status without any damage, while the embedded leather can emerge distortion because the fibre
was fixed during the solidifying and immersing of the resin. In this research, 2357 images of leather fibre were investigated on wet blue leather(original fibre) and the same piece of leather embedded by epoxy resin(embedded fibre). The area ratio of the sections from the original fibre and the embedded fibre was examined for each image. The statistic results showed that the mode of area ratio of the original fibre section to the entire fibre section is 75%, and the mode of area ratio of the embedded fibre section to the embedded fibre entire section is only 48%. The mode of the area ratio of the original fibre is obviously higher than the mode of the area ratio of the embedded fibre, that is diverse with the anticipation of fibre swelling caused by resin. The reason might be the expansion of interval space among the fibre filled with epoxy resin, otherwise the conglutination of fibre caused by the evaporation of solvent(acetone used in embedding) in the course of the resion solidifying. Likewise, it can be the adhesion of the tiny fibre with the larger fibre that will diminish the area caculated. The factors will be studied further on embedding to achieve a method with minimum deformation on cross image of fibre.
Take-Away:
The area ratio of cross section on embedded fibre shrunk comparing with the original fibre, that is out of anticipation of the probable swelling created by resin.
| Identifer | oai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:34299 |
| Date | 26 June 2019 |
| Creators | Lu, Jianmei, Hua, Yuai, Zhang, Huayong, Cheng, Jinyong, Xu, Jing, Li, Tianduo |
| Contributors | International Union of Leather Technologists and Chemists Societies |
| Publisher | Verein für Gerberei-Chemie und -Technik e. V., Forschungsinstitut für Leder und Kunststoffbahnen (FILK) gGmbH |
| Source Sets | Hochschulschriftenserver (HSSS) der SLUB Dresden |
| Language | English |
| Detected Language | English |
| Type | info:eu-repo/semantics/publishedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text |
| Rights | info:eu-repo/semantics/openAccess |
| Relation | urn:nbn:de:bsz:14-qucosa2-340872, qucosa:34087 |
Page generated in 0.002 seconds