A dissertation submitted to the Faculty of Engineering, University of the Witwatersrand, Johannesburg, in fulfillment of the requirements for the degree of Master of science in
Engineering. Johannesburg, 1992. / This project involves the comparison of different failure criteria with experimental results for fibre composite materials, and investigates the usefulness of acoustic emission in composite testing. Three sets of specimens were tested to failure in tension. The specimens had various ply orientations and were tested using acoustic emission to determine ply failures. Carbon and glass fibre reinforced epoxy pre-impregnated specimens were used. The testing machine was an ESH testing machine, and a physical Acoustics corporation computer and data acquisition unit were used to record data from a piezo-electric sensor. Suitable failure criteria should be chosen on the basis of ply orientation and material type (eg fibre stiffness), a combination of criteria being used if necessary. Acoustic emission was successfully used to detect ply failure in multi-layered laminates. / AC2017
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:wits/oai:wiredspace.wits.ac.za:10539/22068 |
| Date | January 1992 |
| Creators | Campbell, I |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | Online resource ([269] leaves), application/pdf |
Page generated in 0.0022 seconds