This thesis presents a proposed methodology for the field evaluation of the efficiency, energy, environmental, and safety impacts of traffic-flow improvement projects. The methodology utilizes Global Positioning System (GPS) second-by-second speed measurements using fairly inexpensive GPS units to quantify the impacts of traffic-flow improvement projects on the efficiency, energy, and safety of a transportation network. It should be noted that the proposed methodology is incapable of isolating the effects of induced demand and is not suitable for estimating long-term impacts of such projects that involve changes in land-use. Instead, the proposed methodology can quantify changes in traffic behavior and changes in travel demand.
This thesis, also, investigates the ability of various data smoothing techniques to remove such erroneous data without significantly altering the underlying vehicle speed profile. Several smoothing techniques are then applied to the acceleration profile, including data trimming, Simple Exponential smoothing, Double Exponential smoothing, Epanechnikov Kernel smoothing, Robust Kernel smoothing, and Robust Simple Exponential Smoothing. The results of the analysis indicate that the application of Robust smoothing (Kernel of Exponential) to vehicle acceleration levels, combined with a technique to minimize the difference between the integral of the raw and smoothed acceleration profiles, removes invalid GPS data without significantly altering the underlying measured speed profile
The methodology has been successfully applied to two case studies provided insights as to the potential benefits of coordinating traffic signals across jurisdictional boundaries. More importantly two case studies demonstrate the feasibility of using GPS second-by-second speed measurements for the evaluation of operational-level traffic flow improvement projects. To identify any statistically significant differences in traffic demand along two case study corridors before and after traffic signal condition, tube counts and turning counts were collected and analyzed using ANOVA technique. The ANOVA results of turning volume counts indicated that there is no statistically significant difference in turning volumes between the before and after conditions. Furthermore, the ANOVA results of tube counts also confirmed that there did not appear to be a statistically significant difference (5 percent level of significance) in the tube counts between the before and after conditions. / Ph. D.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/29124 |
| Date | 28 September 2001 |
| Creators | Sin, Heung Gweon |
| Contributors | Civil Engineering, Rakha, Hesham A., Collura, John, Dion, Francois, Trani, Antonio A., Teodorovic, Dusan |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Dissertation |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | Dissertation1.pdf |
Page generated in 0.0026 seconds