Thermoplastic composites that have been reinforced by thermotropic liquid crystalline (TLCP) fibrils in the microscale and by nanoparticles in the nanoscale are defined as multi-scale wholly thermoplastic composites (WTCs). Multi-scale WTCs have been proposed as lightweight replacements with high performance for some traditional glass fiber (GF) and carbon fiber (CF) reinforced composites materials in various applications. TLCPs are known for performing mechanical properties similar to those of the lower end of CF but significantly better than those of GF. To enhance the mechanical properties of TLPC reinforced WTCs, carbon nanotubes (CNTs) are considered being used as a secondary enhancement in WTCs. CNTs have gathered significant interest in the last 30 years because of their high aspect ratio, high mechanical properties, and other high-performance properties. The focus of this work is on investigating the processing conditions of generating in situ injection-molded multi-scale WTCs, then extending the technology to dual-extrusion and fused filament fabrication (FFF) and obtain high-performance multi-scale WTC products.
This dissertation initially focused on investigating the processing conditions, in particular mixing histories and processing temperature profiles, of generating in situ injection-molded multi-scale WTCs, which consist of a representative TLCP, scCO2 aided exfoliated CNTs, and the thermoplastic matrix polyamide 6 (PA 6). The supercooling behavior of the TLCP and thermal stability of PA 6 are studied by applying the rheological methods of small amplitude oscillatory shear (SAOS). Multiple mixing histories with CNTs and processing temperature profiles are analyzed based on the criterion of maximizing tensile properties of multi-scale WTCs and minimizing thermal degradation of the matrix. Under the optimum processing conditions, the in situ injection-molded multi-scale WTCs exhibit a 26% and 34% tensile modulus and strength enhancement, compared to the in situ injection-molded WTCs with no CNTs. Scanning electron micrograph (SEM) images were used to understand the enhancement.
The second part of this work is to extend the scCO2 aided in situ multi-scale WTCs processing technology to dual-extrusion and FFF. Multi-scale WTC filaments, which consists of TLCP, CNTs, and polyamide copolymer (PAc), are generated by dual-extrusion, and 3D printed into rectangular specimens in FFF. The 1 wt% CNTs reinforced multi-scale WTC filaments generated by the means of dual-extrusion exhibit 225% and 80% improvement in tensile modulus and strength, respectively, compared to the WTC filaments with no CNTs. In FFF, 40 wt% TLCP/1 wt% CNT/PAc 3D printed specimens with filament laid in longitudinal direction exhibited excellent tensile modulus and strength of 38.92 GPa and 127.16 MPa, respectively. The well-dispersed exfoliated CNTs show high alignment with TLCP microfibrils in the multi-scale WTC filaments and their laid-down specimens, which causes the significant tensile modulus enhancement. Bridging elements are discovered between TLCP fibrils and PAc matrix to improve interfacial adhesion, which is attributed to the well-dispersed exfoliated CNTs.
Finally, the significant improvements in tensile properties attributed to scCO2 aided exfoliated CNTs in WTCs are verified on the multi-scale WTCs based on polypropylene (PP). Moreover, additional tensile properties improvements for exfoliated CNTs reinforced multi-scale WTCs are obtained with the use of maleic anhydride grafted polypropylene (MAPP). With 1 wt% CNTs and 16 wt% MAPP dual reinforcement, 20 wt% TLCP reinforced WTCs based on polypropylene (PP) exhibit 265%, 274%, and 182% improvement in the tensile modulus of the filaments, laid up specimens in the concentric pattern and laid up specimens in ±45° rectilinear pattern, respectively. The dual reinforcement also improves the tensile strength of 20 wt% TLCP reinforced WTC filaments by up to 73%. The high alignment between TLCP fibrils and CNTs are confirmed in the multi-scale WTCs based on PP. Besides the bridging elements attributed to CNTs found in the second part of this work, SEM images show that CNTs are partially trapped in TLCP fibrils. / Doctor of Philosophy / Considering the need for environmentally friendly materials, novel thermoplastic composites with high mechanical performance, lightweight, and potentially high recyclability properties were generated in this work. Two types of thermoplastic matrices, polyamide (PA or nylon) and polypropylene (PP) were reinforced with carbon nanotubes (CNTs) and rigid chain polymers known as thermotropic liquid crystalline polymers (TLCPs). CNTs are known for their high mechanical properties and high aspect ratio, which are helpful to reinforce thermoplastic composite materials. During injection molding and the dual-extrusion processes, TLCPs deform into almost continuous microfibrils and reinforce the thermoplastic matrices. Instead of using traditional glass fibers or carbon fibers to reinforce thermoplastics, TLCP reinforced thermoplastic composites, which are defined as wholly thermoplastic composites (WTCs), can retain their mechanical properties during the recycling process such as in injection molding and have better performance during the lay-down process in fused filament fabrication. The goal of this work was to generate CNTs reinforced WTCs for use in injection molding and fused filament fabrication with high mechanical performance.
In the injection molding process for generating CNTs reinforced WTC end-gated plaques, it was determined that the optimum thermal mixing histories for the CNTs could be identified by the inspections of the tensile property measurements and scanning electron microscopy (SEM). With the obtained optimum thermal mixing histories with CNTs, CNTs reinforced WTC filaments were generated by dual extrusion technology and used in fused filament fabrication. With 1 wt% addition of CNTs, the tensile properties of WTCs were significantly enhanced in both the filament materials and the laid-down parts. Especially, the CNT reinforced WTC filaments based on nylon matrices exhibited competitive tensile moduli to long carbon fiber reinforced nylon composite filaments, which was also competitive to the properties of aluminum alloys. In addition, the laid-down parts of CNTs reinforced WTC based on PP presented further tensile strength improvement due to the improved interfacial adhesion between the laid-down filaments and between layers, which was attributed to the addition of maleic anhydride grafted polypropylene.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/111090 |
| Date | 07 January 2021 |
| Creators | Han, Jier Yang |
| Contributors | Chemical Engineering, Baird, Donald G., Bortner, Michael J., Foster, Earl Johan, Martin, Stephen Michael, Barone, Justin Robert |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Dissertation |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0028 seconds