The doctoral thesis deals with the analysis of the flow in the circular and not circular cross-section pipes by methods using the distribution of the vorticity density. This analysis is particularly focused on the derivation of the new velocity profiles formulas using the above mentioned method. In this work is presented a historical overview of the derived velocity profiles. This overview of already derived velocity profiles will be a fundamental benchmark for newly derived velocity profiles. These new velocity profiles are derived for the circular and not circular cross-section pipes and the derivation is based on the analogy of electromagnetic induction by using Biot-Savart law. It is necessary to apply this analogy at first on solitary vortex filament. By taking this step is possible to get the value of the induced velocity from one solitary vortex filament. Subsequently it is possible to obtain the value of the induced velocity from the vorticity wall and afterwards from the vorticity density distribution over the cross section. This work contains also the results of the experimental measurements of the velocity profiles, and of the CFD simulations. Experimentally measured results are used besides other for the selecting of the most suitable CFD computational model. Selected CFD model will be subsequently declared as a reference model and the valid velocity profiles for this model will serve with the experimentally measured data as a benchmark for the newly derived velocity profiles.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:256550 |
Creators | Soukup, Lubomír |
Contributors | Štigler, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds