Return to search

Investigation on interactions of unsteady wakes and film cooling on an annular endwall

In recent decades, greater interest in the effect of rotational wakes on gas turbine film cooling applications has produced increasing numbers of studies on these unsteady phenomena. Wakes are primarily shed from upstream components such as transition duct walls, stator vanes, and rotors. Studies have shown that in areas of unsteady flow, the best performing parameters in conventional steady investigations may not be the best for unsteady applications. One common method of modeling the unsteady wake interaction in subsonic flows is the use of spoke wheel type wake generators using cylindrical rods to produce the velocity detriment and local increase in turbulence intensity. Though the impact of wakes have been studied for decades on airfoil losses and boundary layer transition, only recently has the film cooling and wake interaction been investigated. The existing work is primarily on leading edge models and airfoil cascades. The primary parameter characterizing the unsteady wakes is the dimensionless or reduced frequency known as the Strouhal number. The film cooling jet itself has dominant frequencies resulting from the shear and the jet trailing wake shedding, depending on the injectant flow rate. There exist great deficiencies in the fundamental understanding of the interaction of these two frequencies. Heat transfer considerations are also relatively recent being studied only since the early 1990's. Heat transfer coefficients and film cooling effectiveness have been reported for leading edge and linear airfoil cascades. In the case of the linear cascade, no data can be taken near the endwall region due to the varying tangential velocity of wake generating rod. The current work expands on this initiative incorporating a sector annular duct as the test setting for the rotating wakes focusing on this endwall region.; Studies in to the effect of the rods in this alternate orientation include film cooling effectiveness using temperature sensitive paint, impact of wake rod to film cooling hole diameter ratio, and time accurate numerical predictions and comparisons with experimental work. Data are shown for a range of momentum flux ratios and Strouhal numbers. The result of this work sets the stage for the complete understanding of the unsteady wake and inclined jet interaction.

Identiferoai:union.ndltd.org:ucf.edu/oai:stars.library.ucf.edu:honorstheses1990-2015-2218
Date01 December 2011
CreatorsGolsen, Matthew J.
PublisherSTARS
Source SetsUniversity of Central Florida
LanguageEnglish
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceHIM 1990-2015

Page generated in 0.0021 seconds