The Master’s thesis is focused on reaming technology using PVD coated reamers with cermet cutting edge. This work point out a historical evolution of reaming technology as well as recent requirements to the quality of produced surfaces. Reamers characteristic, splitting, mechanical designs, cutting tool geometry as well as the assumption of a reamer potential evolution are presented. Application of cermet tool material and PVD coatings to reaming tools is considered. The work contains a review of present statement at reamer market including cermet reamers and provided single cells (elements) of the Tool Management. The experimental part of the work is focused on product manufacture qualities verification of the changeable PVD coated reamer head made by HAM-FINAL ltd. Economic analysis in case of investment to the reamer purchase is demonstrated on the example of the practical application of the reamer.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228662 |
Date | January 2009 |
Creators | Technik, Radim |
Contributors | Humár, Anton, Kouřil, Karel |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.013 seconds