VPT, Inc and the U.S. Dept. of Energy have sponsored the development of a high-speed 12 kW AC induction motor to drive automotive fuel cell air compressors. As one part of the development, thermal considerations and the cooling system are detailed in this paper.
The motor and inverter are packaged in one unit with the heat sink in the middle. The heat sink is a cold chamber designed to absorb the maximum heat losses from the unit. Empirical data was used to validate the model of the cold chamber and finalize the design.
A lumped capacitance finite-difference model was developed to simulate the entire motor inverter assembly. The individual components of the thermal model were tested and the data was used to calibrate and validate the thermal model.
Using the model, the thermal overload conditions were investigated. The limiting factors are the stator copper winding temperatures, which can damage the plastic slot liners. The double current test was simulated and operating temperatures of the system remained within thermal limits for 4 minutes.
As a conclusion from the model, the thermal resistances from the stator to the case or the heat sink need to be reduced. Integrating the motor casing and end plate to the heat sink, rather than building it in sections, would reduce the thermal contact resistances. Also the copper winding ends in the stator could be coated in material that would bond to the case, thus increasing heat transfer from the windings to the case. / Master of Science
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/33452 |
| Date | 30 June 2004 |
| Creators | Lohse-Busch, Henning |
| Contributors | Mechanical Engineering, Nelson, Douglas J., Ellis, Michael W., Reinholtz, Charles F. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
| Relation | HLB03_thesis.pdf |
Page generated in 0.0022 seconds