The thesis builds on the project FSI-S-14-2394, in which the biaxial state of tension of longitudinally welded tubes made from material 17 240 was investigated. The experiment was carried out under dynamic conditions on an impact tester, which was designed with structural simplicity and ease of observation of the experiment in mind. Deformation was recorded by high-speed cameras and a dynamometer. Results of the experiment were processed by measuring devices and subsequently used in a simulation created using a software utilizing the finite element method. Simulations were created for samples DA8 and DB9. These samples were selected because they did not crack and were fully stamped. Results of the simulation correspond to the values measured by high-speed cameras and a dynamometer with a small variance. Based on comparison of the results, it can be states that the simulation is technically acceptable.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:318817 |
| Date | January 2017 |
| Creators | Hlavačka, Daniel |
| Contributors | Peterková, Eva, Řiháček, Jan |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds