Micro-motion devices may share a common architecture such that they have a main body of compliant material and some direct actuation elements (e.g., piezoelectric element). The shape of such a compliant material is designed with notches and holes on it, and in this way one portion of the material deforms significantly with respect to other portions of the material a motion in the conventional sense of the rigid body mechanism. The devices of this kind are called compliant mechanisms. Computer tools for the kinematical and dynamic motion analysis of the compliant mechanism are not well-developed.
In this thesis a study is presented towards a finite element approach to the motion analysis of compliant mechanisms. This approach makes it possible to compute the kinematical motion of the compliant mechanism within which the piezoelectric actuation element is embedded, as opposed to those existing approaches where the piezoelectric actuation element is either ignored or overly simplified. Further, the developed approach allows computing the global stiffness and the natural frequency of the compliant mechanism.
This thesis also presents a prototype compliant mechanism and a test bed for measuring various behaviors of the prototype mechanism. It is shown that the developed approach can improve the prediction of motions of the compliant mechanism with respect to the existing approaches based on a comparison of the measured result (on the prototype) and the simulated result. The approach to computation of the global stiffness and the natural frequency of the compliant mechanism is validated by comparing it with other known approaches for some simple mechanisms.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-04112005-130655 |
| Date | 13 April 2005 |
| Creators | Tjiptoprodjo, Ranier Clement |
| Contributors | Zhang, W. J. (Chris), Kushwaha, Radhey Lal, Hertz, P. Barry, Gupta, Madan M., Dolovich, Allan T., Chen, X. B. (Daniel) |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-04112005-130655/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0025 seconds