Experimental characterisation of rubber in uniaxial, equi-biaxial and planar tension under cyclic quasi-static loading shows strain-induced stress softening, hysteresis and unrecoverable strain. The objective of this work is to study the applications and limitations involved in predicting the behaviour of rubber with hyperelastic models. To assume a preconditioned perfectly elastic material, the data obtained from experiments must first be simplified. The data is then fitted to popular hyperelastic models in the finite element analysis (FEA) software ANSYS(TM). A single hyperelastic model (with given coefficients) is shown to only provide a good fit to a single characterisation test and level of preconditioning at the time. A two-iteration preconditioning method is developed using different hyperelastic models for a given material to approximate the softening effect of cyclic loading in a static FEA simulation. A biaxiality test is developed, providing information on the dominant mode of simple strain in the elements of a FE model. FEA simulations and experimental tests of a cantilevered rubber plate subjected to a bending load at its free end as well as a rubber guide lug subjected to a transverse deflection are presented and discussed. It is shown that using a single hyperelastic model is insufficient to predict the behaviour of these experiments in FEA simulations. The preconditioning iteration, when applied to these simulations, shows very good agreement with the experiments, both qualitatively and quantitatively. The biaxiality test provides insight on which characterisation test is the most appropriate for curve fitting hyperelastic models for a given analysis.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.99797 |
| Date | January 2006 |
| Creators | Wadham-Gagnon, Matthew. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Engineering (Department of Mechanical Engineering.) |
| Rights | © Matthew Wadham-Gagnon, 2006 |
| Relation | alephsysno: 002593358, proquestno: AAIMR32625, Theses scanned by UMI/ProQuest. |
Page generated in 0.0021 seconds