Return to search

Produção de enzimas celulolíticas por fermentação em estado sólido em bioreator de leito fixo

Made available in DSpace on 2014-06-11T19:24:46Z (GMT). No. of bitstreams: 0
Previous issue date: 2011-02-23Bitstream added on 2014-06-13T20:32:10Z : No. of bitstreams: 1
zanelato_ai_me_sjrp.pdf: 1477010 bytes, checksum: e2437c2c0ba00be5a6b7df73d8be90f5 (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Este trabalho teve como objetivo produzir enzimas celulolíticas por fermentação em estado sólido (FES), em um bioreator de leito fixo, empregando-se o fungo termofílico Myceliophthora sp. e utilizando-se como substratos bagaço de cana-de-açúcar e farelo de trigo. Os testes foram realizados inicialmente em sacos de polipropileno apresentando uma boa produção de CMCase (550U/g) no período de 96 horas de fermentação. As variáveis controladas foram a temperatura de fermentação (40, 45 e 50ºC), umidade inicial (75, 80 e 85% b.u.) e proporção do substrato de bagaço de cana e farelo de trigo (1:1, 3:7 e 1:9 peso). Os estimadores estatísticos não indicaram diferença significativa da produção de celulase com as variações da proporção de bagaço de cana e de farelo de trigo, com a temperatura e com a umidade inicial do substrato, contudo, os melhores resultados foram obtidos para a proporção de 70% de bagaço de cana e 30% de farelo de trigo, temperatura de 50oC e umidade inicial do substrato de 80%. Nos testes em escala de bioreator, foi empregado um leito fixo de 7cm de diâmetro e 50cm de comprimento, encamisado, operado nas condições experimentais de melhor resultados obtidos na escala de sacos, sendo a temperatura da camisa e vazão de ar as variáveis de interesse. O fungo apresentou um bom desenvolvimento no reator, tendo uma produtividade enzimática semelhante à encontrada em escala de saco. Foi observado um gradiente de umidade no interior do leito, sendo este crescente do fundo para o topo do bioreator, comportamento inverso ao da atividade enzimática. As vazões variaram entre 80 e 120 L/h e não afetaram estatisticamente a fermentação, possuindo pouca influência sobre as distribuições longitudinais de umidade e de atividade enzimática. Já os ensaios para as temperaturas de 45 e 50oC mostraram-se distintos, sendo a maior produção de enzimas após 96h... / This work aimed to produce celullolytic enzymes through solid state fermentation in a fixed bed bioreactor, using the fungus Myceliophtora sp. and wheat bran and sugar cane bagasse as substrate. Initial tests were performed in polypropylene plastic bags, and satisfactory production of CMCase (550U/g.d.s.) was observed at 96h of fermentation. The controlled variables were the temperature (40, 45, and 50o C), the initial moisture content (75, 80, and 85%, w.b.), and wheat bran to sugar cane bagasse proportion (1:1, 3:7, and 1:9, weight). The experimental results did not differ statistically for any experimental condition adopted, even though the best results were obtained using the proportion 3:7 wheat bran/sugar cane bagasse 3:7, 50o C temperature, and 80% initial moisture content. A jacketed fixed bed bioreactor 7.62cm ID and 50cm long was used for scaling-up, and temperature, solid initial moisture content, and air flow rate were used as variables. The fungus adapted well to the bioreactor and to the experimental conditions, and the production of enzymes was similar to the tests performed in the plastic bags. It was observed a longitudinal gradient of moisture, increasing from the bottom to the top of the reactor, opposite effect observed for the enzyme production. The air flow rate was varied from 80 to 120L/h and did not affect neither the moisture nor the enzyme distributions. However, the experiments carried out at 45 and 50o C were statistically distinct, and the enzyme production at 50o C at 96h was larger than at 45o C. At 144h of fermentation, the results at 45o C were similar to those observed at 50o C and 96h. It was observed temperature peaks, the higher one at 18h of fermentation, which was 6o C above the temperature fixed through the jacket and the air at the entrance, for 45o C temperature and 80L/h air flow rate

Identiferoai:union.ndltd.org:IBICT/oai:repositorio.unesp.br:11449/90759
Date23 February 2011
CreatorsZanelato, Alex Izuka [UNESP]
ContributorsUniversidade Estadual Paulista (UNESP), Thoméo, João Claudio [UNESP]
PublisherUniversidade Estadual Paulista (UNESP)
Source SetsIBICT Brazilian ETDs
LanguagePortuguese
Detected LanguagePortuguese
Typeinfo:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis
Format116 f. : il. color.
SourceAleph, reponame:Repositório Institucional da UNESP, instname:Universidade Estadual Paulista, instacron:UNESP
Rightsinfo:eu-repo/semantics/openAccess
Relation-1, -1

Page generated in 0.0065 seconds