Master s thesis is focused on flaring of tubes endings. There are also mentioned theoretical pieces of knowledge which relate to tubes endings by a flat edge and a cone. The following experiments performed with the own material and tools made by the author s design. Experiments in the production of the flat collar led to the speedy rotation of the sample ending. Experiments with the conical ending brought valuable results from the point of view of comparison of theoretical and measured powers, distribution of thicknesses and utilization of the deformation web to set voltage-deformation state. The dimension excent of the conical ending was limited by the formation of buckling in the cylindrical part of the tube.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:231098 |
| Date | January 2015 |
| Creators | Exnerová, Jitka |
| Contributors | Peterková, Eva, Samek, Radko |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0023 seconds