The Diploma thesis describes the implementation of innovative production of protective liner to the manufacturing company. The liner is manufactured in sizes of nominal diameter DN 200 - DN 500. The material is low-alloy steel EN 10216-2 10CrMo9-10. For the production innovation, the technology of pipe end flaring by a movable mandrel was chosen. Verification of the functionality of this technology was performed using analytical calculations and numerical simulation of FEM. The results of numerical methods were compared with the results of a practical experiment. The experiment was performed on 5 test specimens with a diameter of 273 mm. The machine device was a hydraulic press with a nominal force of 2000 kN and equipped with pressure and position sensors. The experimentally obtained values of force and the tool path dependence were similar with the values of FEM simulation. The difference in the value of the force in the maximum tool path was 290 kN. The flared diameter was formed to a value of 319 mm. This value corresponds to 16.5% of increased nominal diameter, which is sufficient from design point of view. Non-destructive tests ruled out the presence of crack defects on the flared diameter. According the new set up working procedure was produced the first real part. Significant financial savings of CZK 3.5 - 5.3 million / year were quantified in the technical and economic evaluation. Return on necessary investments is between the 9th - 14th manufactured pieces (approx. 15% of the annual production volume). In conclusion, innovation has promising results and will be issued by the company into the production process.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417094 |
| Date | January 2020 |
| Creators | Kukla, Petr |
| Contributors | Lidmila, Zdeněk, Peterková, Eva |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds