Return to search

Embedding Logic and Non-volatile Devices in CMOS Digital Circuits for Improving Energy Efficiency

abstract: Static CMOS logic has remained the dominant design style of digital systems for

more than four decades due to its robustness and near zero standby current. Static

CMOS logic circuits consist of a network of combinational logic cells and clocked sequential

elements, such as latches and flip-flops that are used for sequencing computations

over time. The majority of the digital design techniques to reduce power, area, and

leakage over the past four decades have focused almost entirely on optimizing the

combinational logic. This work explores alternate architectures for the flip-flops for

improving the overall circuit performance, power and area. It consists of three main

sections.

First, is the design of a multi-input configurable flip-flop structure with embedded

logic. A conventional D-type flip-flop may be viewed as realizing an identity function,

in which the output is simply the value of the input sampled at the clock edge. In

contrast, the proposed multi-input flip-flop, named PNAND, can be configured to

realize one of a family of Boolean functions called threshold functions. In essence,

the PNAND is a circuit implementation of the well-known binary perceptron. Unlike

other reconfigurable circuits, a PNAND can be configured by simply changing the

assignment of signals to its inputs. Using a standard cell library of such gates, a technology

mapping algorithm can be applied to transform a given netlist into one with

an optimal mixture of conventional logic gates and threshold gates. This approach

was used to fabricate a 32-bit Wallace Tree multiplier and a 32-bit booth multiplier

in 65nm LP technology. Simulation and chip measurements show more than 30%

improvement in dynamic power and more than 20% reduction in core area.

The functional yield of the PNAND reduces with geometry and voltage scaling.

The second part of this research investigates the use of two mechanisms to improve

the robustness of the PNAND circuit architecture. One is the use of forward and reverse body biases to change the device threshold and the other is the use of RRAM

devices for low voltage operation.

The third part of this research focused on the design of flip-flops with non-volatile

storage. Spin-transfer torque magnetic tunnel junctions (STT-MTJ) are integrated

with both conventional D-flipflop and the PNAND circuits to implement non-volatile

logic (NVL). These non-volatile storage enhanced flip-flops are able to save the state of

system locally when a power interruption occurs. However, manufacturing variations

in the STT-MTJs and in the CMOS transistors significantly reduce the yield, leading

to an overly pessimistic design and consequently, higher energy consumption. A

detailed analysis of the design trade-offs in the driver circuitry for performing backup

and restore, and a novel method to design the energy optimal driver for a given yield is

presented. Efficient designs of two nonvolatile flip-flop (NVFF) circuits are presented,

in which the backup time is determined on a per-chip basis, resulting in minimizing

the energy wastage and satisfying the yield constraint. To achieve a yield of 98%,

the conventional approach would have to expend nearly 5X more energy than the

minimum required, whereas the proposed tunable approach expends only 26% more

energy than the minimum. A non-volatile threshold gate architecture NV-TLFF are

designed with the same backup and restore circuitry in 65nm technology. The embedded

logic in NV-TLFF compensates performance overhead of NVL. This leads to the

possibility of zero-overhead non-volatile datapath circuits. An 8-bit multiply-and-

accumulate (MAC) unit is designed to demonstrate the performance benefits of the

proposed architecture. Based on the results of HSPICE simulations, the MAC circuit

with the proposed NV-TLFF cells is shown to consume at least 20% less power and

area as compared to the circuit designed with conventional DFFs, without sacrificing

any performance. / Dissertation/Thesis / Doctoral Dissertation Electrical Engineering 2018

Identiferoai:union.ndltd.org:asu.edu/item:49046
Date January 2018
ContributorsYang, Jinghua (Author), Vrudhula, Sarma (Advisor), Barnaby, Hugh (Committee member), Cao, Yu (Committee member), Seo, Jae-sun (Committee member), Arizona State University (Publisher)
Source SetsArizona State University
LanguageEnglish
Detected LanguageEnglish
TypeDoctoral Dissertation
Format180 pages
Rightshttp://rightsstatements.org/vocab/InC/1.0/, All Rights Reserved

Page generated in 0.0018 seconds