Main issue of this master´s thesis deals with high-frequency pulsations caused by cavitating hydraulic components (in this case nozzle and throttle valve). In first measurement on the nozzle was not a high-frequency sensor set in the way, so the evaluation was incorrect. After re-setting of the way was the nozzle measured again and the pulsations were evaluated correct this time. During the last measurement was the sensor located behind the throttle valve, which was with gradual opening and cavitation treatment measured. Resulting dependencies worked out on time dependence. A special mathematical method, Fourier transformation, was used. It transformed pressure amplitudes into frequency dependence. Evaluation of dependecies is the basic step for frequency band assesment, in which the cavitation on particular components happens.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229051 |
| Date | January 2010 |
| Creators | Šebek, Miloš |
| Contributors | Hudec, Martin, Habán, Vladimír |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds