The aerodynamic steering forces and moments on a wind tunnel model of an axisymmetric bluff body are altered by induced segmented attachment of the separated flow over an azimuthal Coanda surface. The model is suspended in the wind tunnel by eight thin wires for minimal support interference within the wake. Each wire is instrumented with a miniature strain gage sensor for direct dynamic force measurements. Control is effected by an array of synthetic jet actuators that emanate from narrow, azimuthally-segmented slots, within a backward facing step. The aerodynamic effects are characterized using hot-wire anemometry and PIV measurements. In the first set of experiments, the array of synthetic jets is distributed around the perimeter of the circular tail end which is extended into a Coanda surface. The fluidic actuation results in segmented vectoring of the separated base flow along the rear Coanda surface and induces asymmetric aerodynamic forces and moments that can effect steering during flight. Transitory modulation of the actuation waveform of multiple actuators around the tail leads to the generation of significant dynamic side forces of controlled magnitude and direction with the potential utility for flight stabilization and fast maneuvering. In a second set of experiments the array of the synthetic jets is placed upstream of a mid-body axisymmetric cavity. A single jet induces a quasi-steady, nearly-matched force couple at the upstream and downstream ends of the cavity. Furthermore, transitory activation of multiple jets can be used to control the onset and sequencing of the couple forces and therefore the resultant force and moment.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/31707 |
| Date | 17 November 2009 |
| Creators | Abramson, Philip S. |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds