This thesis proposes a new type of hydraulic valve: an adjustable-ratio flow divider. This valve attempts to split one input flow into two output flows in a predetermined ratio, independent of load pressure or total flow. The valve uses a two dimensional structure to form a two-stage valve with only one moving part; the pilot stage uses the spool s rotary position, and the main stage uses its linear position. This arrangement allows for a cheaper, simpler valve with smaller volumes (translating into faster response). The ratio of outlet flows can be set on the fly by the angular position of the spool, driven by a stepper motor or other low-power input.
In order to evaluate the initial feasibility of the concept, steady state and dynamic models were developed and the effects of the physical parameters were studied. Two non-linear non-derivative multiobjective optimization strategies were used to determine the optimum parameters for a prototype. Finally, the prototype s performance was experimentally examined and appears to work as expected.
| Identifer | oai:union.ndltd.org:USASK/oai:usask.ca:etd-08312004-100306 |
| Date | 31 August 2004 |
| Creators | Wiens, Travis Kent |
| Contributors | Sumner, David, Schoenau, Greg J., Roberge, Martin, Habibi, Saeid R., Burton, Richard T. |
| Publisher | University of Saskatchewan |
| Source Sets | University of Saskatchewan Library |
| Language | English |
| Detected Language | English |
| Type | text |
| Format | application/pdf |
| Source | http://library.usask.ca/theses/available/etd-08312004-100306/ |
| Rights | unrestricted, I hereby certify that, if appropriate, I have obtained and attached hereto a written permission statement from the owner(s) of each third party copyrighted matter to be included in my thesis, dissertation, or project report, allowing distribution as specified below. I certify that the version I submitted is the same as that approved by my advisory committee. I hereby grant to University of Saskatchewan or its agents the non-exclusive license to archive and make accessible, under the conditions specified below, my thesis, dissertation, or project report in whole or in part in all forms of media, now or hereafter known. I retain all other ownership rights to the copyright of the thesis, dissertation or project report. I also retain the right to use in future works (such as articles or books) all or part of this thesis, dissertation, or project report. |
Page generated in 0.0253 seconds