Return to search

Best Practices for Volume Flow Rate Measurements Using PIV at the Exit of a Turbulent Planar Jet

Particle image velocimetry (PIV) is used to make volume-flow-rate measurements at the exit of a turbulent, planar nozzle. The objective of this report is to assess a range of data acquisition and processing parameters. Data is acquired for volume flow rates of Reynolds numbers between 10,000 and 100,000 for both two-component (2C) and stereo PIV. The parameters are systematically changed one at a time and evaluated using differences in uncertainty, calculation time, and volume- flow-rate deviation. Data acquisition parameters follow the trends of previous work. A multitude of processing parameters were varied for several PIV processing methods. Recommendations for each method are developed and listed with potential drawbacks. 2C PIV was found to underestimate volume-flow-rate by 3-4% depending on the integration scheme and stereo PIV underestimated volume-flow-rate by 2%.

Identiferoai:union.ndltd.org:UTAHS/oai:digitalcommons.usu.edu:etd-6264
Date01 December 2016
CreatorsCressall, Rick
PublisherDigitalCommons@USU
Source SetsUtah State University
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceAll Graduate Theses and Dissertations
RightsCopyright for this work is held by the author. Transmission or reproduction of materials protected by copyright beyond that allowed by fair use requires the written permission of the copyright owners. Works not in the public domain cannot be commercially exploited without permission of the copyright owner. Responsibility for any use rests exclusively with the user. For more information contact digitalcommons@usu.edu.

Page generated in 0.002 seconds