This dissertation will consider the sound radiation from forward-facing steps and a three dimensional cylindrical embossment of very low aspect ratio mounted on a plate. Glegg et al (2014) outlined a theory for predicting the sound radiation from separated flows and applied the method to predicting the sound from forward-facing steps. In order to validate this theory it has been applied to the results of Catlett et al (2014) and Ji and Wang (2010). This validation study revealed that the original theory could be adjusted to include a mixed scaling which gives a better prediction. RANS simulations have been performed and used to support the similarities between the forward-facing step and the cylindrical embossment. The simulations revealed that the cylindrical embossment exhibits a separation zone similar to that of the forward-facing step. This separation zone has been shown to be the dominant source of noise on the forward-facing step in previous works and therefore was expected to be the major source of sound from the cylindrical embossment. The sensitivity of this separation zone to the different parameters of the flow has been investigated by performing several simulations with different conditions and geometries. The separation zone was seen to be independent of Reynolds number based on boundary layer thickness but was directly dependent on the height of the cylinder. The theory outlined in Glegg et al (2014) was then reformulated for use with a cylindrical embossment and the predictions have been compared with wind tunnel measurements. The final predictions show good agreement with the wind tunnel measurements and the far-field sound shows a clearly defined directionality that is similar to an axial dipole at low frequencies. / Includes bibliography. / Dissertation (Ph.D.)--Florida Atlantic University, 2015. / FAU Electronic Theses and Dissertations Collection
| Identifer | oai:union.ndltd.org:fau.edu/oai:fau.digital.flvc.org:fau_32068 |
| Contributors | Bryan, Benjamin Skyler (author), Glegg, Stewart A. L. (Thesis advisor), Florida Atlantic University (Degree grantor), College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering |
| Publisher | Florida Atlantic University |
| Source Sets | Florida Atlantic University |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation, Text |
| Format | 145 p., application/pdf |
| Rights | Copyright © is held by the author, with permission granted to Florida Atlantic University to digitize, archive and distribute this item for non-profit research and educational purposes. Any reuse of this item in excess of fair use or other copyright exemptions requires permission of the copyright holder., http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0031 seconds