In this thesis, I describe experiments that were designed to provide a better understanding of polymer diffusion during latex film formation. This step leads to the improvement of film mechanical properties. Polymer diffusion in these films was monitored by fluorescence resonance energy transfer. Current paint formulations contain Volatile Organic Compounds (VOCs) as plasticizers to facilitate polymer diffusion. The drawback of this technology is the release of VOCs to the atmosphere. VOCs are deleterious to the environment and contribute to smog and ground level ozone formation.
The propensity of water, an indispensible part of any latex dispersion, to promote polymer diffusion was studied. Copolymers of poly (butyl acrylate-co-methyl methacrylate) and poly(ethylhexyl acrylate-co-tertiary butyl methacrylate) with similar glass transition temperatures but different hydrophobicity were compared. Polymer diffusion was monitored for films aged at different relative humidities. Water absorbed by the hydrophobic copolymer film was less efficient in promoting polymer diffusion than in the hydrophilic polymer. Only the fraction of water which is molecularly dissolved in the film participate actively in plasticization. Although water has low solubility in most latex polymers, molecularly dissolved water is more efficient than many traditional plasticizers.
The possibility of modifying film formation behavior of acrylic dispersions with oligomers was studied by synthesizing hybrid polymer particles consisting of a high molecular weigh (high-M) polymer and an oligomer with the same composition. Oligomers with lower molecular weight are more efficient as diffusion promoters and have less deleterious effect on high-M polymer viscosity.
A different set of hybrid particles were prepared in which the oligomer contained methacrylic acid units. The composition of the oligomer was tuned to be miscible with the high-M polymer when the acid groups were protonated but to phase separate when the acid groups were deprotonated. At basic pH, these particles adopt a core-shell morphology, with a shell rich in neutralized oligomers. After film formation, the oligomer shell retarded polymer diffusion. This retardation is expected to expand the time window during which the paint surface can be altered without leaving brush marks (open time). Short open time is a pressing problem in current technology.
| Identifer | oai:union.ndltd.org:TORONTO/oai:tspace.library.utoronto.ca:1807/32896 |
| Date | 31 August 2012 |
| Creators | Soleimani Kheibari, Mohsen |
| Contributors | Winnik, Mitchell A. |
| Source Sets | University of Toronto |
| Language | en_ca |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0019 seconds