Given diploma thesis deals with the design and realization of a device whose purpose is to simulate real condition in the contact area of deep groove ball bearings. Direct observation of such area was then carried out. Initial part of the thesis addresses principles occurring in ball bearings, such as friction and lubrication and wear mechanisms. Several devices which are commonly used for bearing lubrication studies are then described at the work. Subsequently, author’s solution was introduced with the output of Ball-on-ring device. Ball-on-ring configuration is key feature due to its geometry since it enables to create identical conditions as those which occur in ball bearings such as contact pressure and velocities. Lubricant distribution by the contact area is analysed with fluorescent microscopy. Part of this thesis is a validation experiment and drawing documentation of the device.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417848 |
Date | January 2020 |
Creators | Okál, Michal |
Contributors | Hartl, Martin, Košťál, David |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds