Master of Science / Department of Grain Science and Industry / Leland McKinney / Carryover of medicated feed additives between batches of feed can potentially
result in harmful drug residues in the edible tissues of food-animals. Flushing the
equipment with an ingredient, such as ground grain, is one method used to remove any
residual medicated feed from the system. It is generally recommended that the quantity of
flush used be between 5 and 10% of the mixer's capacity. However, there is little data that supports this recommendation. Therefore, two experiments were conducted to 1.)determine which manufacturing equipment is the major source of carryover, 2.)evaluate which flush size adequately prevents drug carryover, and 3.) quantify the
interrelationship between flush size and drug concentration. In Experiment 1, feed
medicated with nicarbazin (Nicarb 25%®; 0.0125%) was manufactured and conveyed
from the mixer, through a drag conveyor and bucket elevator, and then into a finished
product bin. The system was then flushed using ground corn in the amount of 2.5, 5, 10, 15, or 20% of the mixer's capacity (454.5 kg). Subsequently, a non-medicated diet was conveyed through the system and samples were collected and analyzed for nicarbazin. No significant (P > 0.05) differences were detected among the flush treatments, and all treatments were effective in preventing nicarbazin carryover to the non-medicated diet. In Experiment 2, feed medicated with three levels of monensin (Rumensin® 80; 100, 600, and 1,200 g/ton) was manufactured and handled in the same manner as in Experiment 1. The flushing treatments examined were: 1, 2.5, and 5% of the mixer's capacity. Samples of the non-medicated diet for each treatment were collected and analyzed for monensin. There was significant interaction (P < 0.05)between drug level and sampling location between treatments. As the drug level in the medicated diet increased, higher concentrations of monensin were detected in the non-medicated diet.
Collectively, these studies demonstrate that a 2.5%, even a 1% flush size, is effective in
preventing carryover of medicated feed additives. It was also demonstrated that the
bucket elevator and finished product bin were the major sources of drug carryover in this particular feed manufacturing system.
Identifer | oai:union.ndltd.org:KSU/oai:krex.k-state.edu:2097/1025 |
Date | January 1900 |
Creators | Martinez-Kawas, Adrian |
Publisher | Kansas State University |
Source Sets | K-State Research Exchange |
Language | en_US |
Detected Language | English |
Type | Thesis |
Page generated in 0.0019 seconds