Return to search

Design and analysis of a composite flywheel preload loss test rig

Flywheel energy storage units have become a viable alternative to electrochemical batteries in applications such as satellites, uninterrupted power supplies, and hybrid vehicles. However, this performance is contingent upon safe operation since these flywheels can release their stored energy almost instantaneously upon failure. The research presented here investigates a health monitoring technology that may give an early indication of degraded material properties in a concentric ring composite flywheel. The existence of degraded material properties is manifested as a change in mass eccentricity due to asymmetric growth of the outermost flywheel ring. A test rig concept to investigate the technology is developed in detail using a systems engineering design process. Successful detection of the change in mass eccentricity was verified analytically through dynamic modeling of the flywheel rotor and magnetic suspension system. During steady state operation detection was determined to be feasible via measurements of the magnetic bearing currents and shaft position provided by the magnetic suspension feedback sensors. A rotordynamic analysis was also conducted and predicts successful operation to the maximum operating speed of 50,000 Rpm.

Identiferoai:union.ndltd.org:TEXASAandM/oai:repository.tamu.edu:1969/100
Date30 September 2004
CreatorsPreuss, Jason Lee
ContributorsPalazzolo, Alan, Lalk, Thomas, DeBlassie, Dante
PublisherTexas A&M University
Source SetsTexas A and M University
Languageen_US
Detected LanguageEnglish
TypeElectronic Thesis, text
Format2253608 bytes, 103150 bytes, electronic, application/pdf, text/plain, born digital

Page generated in 0.0019 seconds