The master’s thesis elaborates an optimum proposal of the production technology of a cutting – a part made of steel plate 11 320.3. The theoretical part represents the problematic issue of cutting technology and on the basis of this part was designed a production of components in processual tool. The processual tool is composed of normalized components and is resolved by using a easel, which is attached into the eccentric press LEXN 100 C (producer Toma Industries) with the nominal drawing force of 1000 kN. The press was chosen on the basis of technological calculations. The work contains necessary calculations, economical evaluation and design documentation of the cutting tool for the components production. The last part contains the technical and economic evaluation of the recently designed technology.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228613 |
| Date | January 2009 |
| Creators | Suchomel, Lukáš |
| Contributors | Špaček, Jindřich, Peterková, Eva |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0014 seconds