In the design of all marine craft the prediction of a vessel??s resistance characteristics is a major consideration. The accurate prediction of resistance is particularly important in the design of modern high-speed vessels where the primary contractual obligation placed upon the builder is the vessel??s achievable speed. Investigation was made of the methods of Doctors and Day, whereby the traditional Michell wave-resistance theory, published in 1898, is improved on through a better understanding of the hydrodynamics of transom sterns and the application of statistically determined form factors. One of the difficulties with the Michell theory is how to account for the hollow that forms behind a transom stern, a feature prevalent in high-speed vessels. A common approach in the numerical prediction of wave resistance for transom-stern vessels is to discretize the hollow as a geometrically-smooth addition to the vessel. Therefore, of great importance in accurate prediction of wave resistance is the hydrodynamics of, and in particular, the length and depth of the hollow formed behind the transom stern. Accordingly, a systematic series of transom-stern models were tank tested at various drafts and speeds in order to determine experimentally the length and depth of the hollow as a function of vessel speed, draft and beam. From the experimental data, algorithms for the determination of the length and depth of the transom hollow, have been developed and utilised in the discretization of the transom hollow for prediction of resistance using the Michell wave- resistance theory. Application of the developed hollow algorithms produced significant improvements in correlation of the experimental and theoretical predictions of total resistance, particularly in the lower Froude range. In addition to the transom-hollow investigation, form factors were obtained using least-squares regression of existing experimental data. The form factors were based on the major geometric parameters of the models used. In the research presented here, the method was applied to a large range of published resistance data for high-speed displacement vessels. Considerable improvement in correlation, between theoretical and experimental predictions of total resistance, was obtained by incorporating the calculated form-factors into the total resistance formulation.
| Identifer | oai:union.ndltd.org:ADTP/204957 |
| Date | January 2008 |
| Creators | Robards, Simon William, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
| Publisher | Publisher:University of New South Wales. Mechanical & Manufacturing Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | http://unsworks.unsw.edu.au/copyright, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.002 seconds