This master’s thesis is focused on the design of the technology to produce a part of the TV bracket. The part is made of steel sheet with a thickness of 2.5 mm. The structural steel S235JR was chosen as the most suitable material with following powder coating. From the possible variants, the production by progressive forming tool was chosen with respect to production requirements and a series size of 30 000 pieces by year. The part will be made in seven steps in designed tool and the total required force is 1013 kN. The production will take place on a mechanical press PCK12 from Bliss-Bret with a maximum force of 1250 kN. The final price of the part is 39.4 Kč.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:416645 |
| Date | January 2020 |
| Creators | Vodák, Marek |
| Contributors | Jopek, Miroslav, Podaný, Kamil |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0019 seconds